Feather is the flagship development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

This is the Assembled Adafruit Feather HUZZAH ESP8266 with headers - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging and ready to go immediately! Its an  ESP8266 WiFi module with all the extras you need, ready to rock! We have other boards in the Feather family, check'em out here.

At the Feather HUZZAH's heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired up a USB-Serial chip that an upload code at a blistering 921600 baud for fast development time. It also has auto-reset so no noodling with pins and reset button pressings.

To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available.

Specifications

  • Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
  • Light as a (large?) feather - 9.7 grams
  • ESP8266 @ 80MHz with 3.3V logic/power
  • 4MB of FLASH (32 MBit)
  • Built in WiFi 802.11 b/g/n
  • 3.3V regulator with 500mA peak current output
  • CP2104 USB-Serial converter onboard with 921600 max baudrate for uploading
  • Auto-reset support for getting into bootload mode before firmware upload
  • 9 x GPIO pins - can also be used as I2C and SPI
  • 1 x analog inputs 1.0V max
  • Built in 100mA LiPoly charger with charging status indicator LED, can also cut a trace to disable the charger
  • Pin #0 red LED for general purpose blinking. Pin #2 blue LED for bootloading debug & general purpose blinking
  • Power/enable pin
  • 4 mounting holes
  • Reset button

Comes fully assembled and tested, with a USB interface that lets you quickly use it with the Arduino IDE or NodeMCU Lua (it comes preprogrammed with the Lua interpreter). This version of the board has also been pre-soldered, so you can plug it right into a solderless breadboard. Click here for the un-soldered version. Lipoly battery and USB cable not included.

Check out our tutorial for all sorts of details, including schematics, files, IDE instructions, power management and more!

Technical Details

  • 23mm x 51mm x 18mm / 0.9" x 2" x 0.71"
  • Weight: 8g

Learn

3D Printed Case for Adafruit Feather

3D Printed Case for Adafruit Feather A Multipurpose Enclosure for Adafruit Feather


Introducing Adafruit Feather

Introducing Adafruit Feather Boards of a Feather flock together!

Assembled Feather Huzzah with ESP8266 WiFi and Headers [3046]

  • Brand: Adafruit
  • Product Code: ADA-3046
  • Reward Points: 22
  • Availability: 3
  • £27.54

  • Ex Tax: £22.95
  • Price in reward points: 300

ESP8266 SMT Module - ESP-12 [2491]

ESP8266 SMT Module - ESP-12 [2491]

£9.84

The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both ...

Qty: 2

HUZZAH ESP8266 Breakout [2471]

HUZZAH ESP8266 Breakout [2471]

£15.54

The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end

Qty: 25

ESP8266 WiFi Module FCC/CE - SPI supported - ESP-12E

ESP8266 WiFi Module FCC/CE - SPI supported - ESP-12E

£8.34

ESP8266 is a ultra-low power UART-WiFi module

Qty: 6

Feather HUZZAH with ESP8266 WiFi [2821]

Feather HUZZAH with ESP8266 WiFi [2821]

£25.14

'All-in-one' ESP8266 WiFi development board with built in USB and battery charging

Qty: 2

Blynk Board - ESP8266 [WRL13794]

Blynk Board - ESP8266 [WRL13794]

£39.53

Specially designed to work with the 'widgets' within the Blynk mobile app to create your next IoT ...

Qty: 3

ESP8266 Thing [WRL13231]

ESP8266 Thing [WRL13231]

£16.74

Breakout and development board for the ESP8266 WiFi SoC with LiPo charger.

Out Of Stock

ESP8266 Thing - Dev Board [WRL13711]

ESP8266 Thing - Dev Board [WRL13711]

£19.73

A development board that has been solely design around the ESP8266, with an integrated FTDI ...

Qty: 3

ESP8266 pHAT for Raspberry Pi

ESP8266 pHAT for Raspberry Pi

£12.48

We've taken the ESP8266 (ESP-12F) module and added the necessary circuitry to allow it to interface ...

Qty: 1

Assembled Feather Huzzah with ESP8266 WiFi and Headers [3046]

Assembled Feather Huzzah with ESP8266 WiFi and Headers [3046]

£27.54

'All-in-one' ESP8266 WiFi development board with built in USB and battery charging and ready to go ...

Qty: 3

Assembled Feather HUZZAH with ESP8266 WiFi with Stacking Headers [3213]

Assembled Feather HUZZAH with ESP8266 WiFi with Stacking Headers [3213]

£27.54

'All-in-one' ESP8266 WiFi development board with built in USB and battery charging

Qty: 3