Taking a break
We're taking a break moving shop and hope to be back soon. We will ship orders on 2018-07-25.
- First BLE + Arduino board under Arduino AtHeart program
- Utilize Nordic Bluetooth Smart SDK for Arduino
- Software development using Arduino IDE
- Over-the-Air download of sketch to Blend Micro (available soon)
- Work with our free Android App and iOS App
We recommend using Codebender, an online development and collaboration platform for all Arduino users, please read to our Quick Start with Codebender to start playing with your Blend Micro in just a few easy steps.
We have also prepared a detail guide Getting Started with Blend Micro to show you how to program your Blend Micro with Arduino IDE.
Blend Micro is our first integrated developement board, we have "blend"ed Arduino with Bluetooth 4.0 Low Energy (aka BLE or Bluetooth Smart) into a single board. It is targeted for makers to develop low power Internet-Of-Things (IoT) projects quickly and easily.
Current supported BLE central devices:
- iPhone 4s
- iPhone 5 (all models)
- iPod touch 5
- iPad 3/4/mini/Air
Android 4.3 or above (4.4 recommended for stability) with Bluetooth 4.0 hardware support
- Nexus 4
- Nexus 5
- Nexus 7
- (please report any other Android devices supported)
Windows Phone 8.1
- Nokia Lumia 630
- (please report any other Windows Phone devices supported)
Windows 8.1 with built-in Bluetooth 4.0 or USB dongle
Mac OSX 10.9.2 with built-in Bluetooth 4.0 or USB dongle
Linux with BlueZ 5.1 with built-in Bluetooth 4.0 or USB dongle
How It Works
- The nRF8001 chip communicates with Atmega32U4 through the ACI (Application Controller Interface). The ACI is similar to SPI but not actually works as SPI. SPI is consist of MOSI, MISO, SCK and SS, whereas ACI is consist of MOSI, MISO, SCK, REQN and RDYN.
- Since the nRF8001 chip may receive data anytime even not selected by SPI master (Atmega32U4), so the SS line is not needed.
- For the ACI, data exchange still through MOSI and MISO, and SCK provides the clock generated by master.
- When master wants to request data from BLE Shield, it puts the REQN to low until RDYN line is put to low by BLE Shiled, and then master generates the clock to read out the data. After reading out the data, master will release the REQN and BLE Shield release the RDYN, put them to high.
- If the nRF8001 has data to transmit to master, it will put the RDYN to low to indicate master, even though the master has not requested data and REQN is idle. If the master detectes a low level condition on RDYN, it will put REQN to low and generate the clock to read out the data. After reading out the data, both REQN and RDYN will be put to high. Note that REQN is controlled by master while RDYN is controlled by the nRF8001 chip.
According to the Atmega32U4 specification, this MCU can run at either 8MHz/3.3V or 16MHz/5V. We have desigend the Blend Micro to run at 3.3V only in order to reduce level shifting components and make it as small as possible; it is because the nRF8001 chip only accepts 3.3V. The onboard LDO converts 5V from the USB power source into 3.3V for the board.
Normally, you should set Blend Micro to run at 8 MHz/3.3V. However, if you want to run faster and not concern about the reliabilty (we do not see any issue so far), you can run it as 16 MHz and this is so-call "overclock".
For questions about Nordic Bluetooth low energy SDK for Arduino,
please visit Nordic Developer Zone
All other questions regarding Blend Micro, please visit our Blend Micro Forum
Blend Micro - Arduino Development Board with BLE
- Brand: Red Bear Lab
- Product Code: REDBEAR-BLENDM-V1
- Reward Points: 21
- Availability: Out Of Stock
- Ex Tax: £21.95
- Price in reward points: 300