The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.

This EasyDriver V4.5 has been co-designed with Brian Schmalz. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.

Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.

Note: This product is a collaboration with Brian Schmalz. A portion of each sales goes back to them for product support and continued development.

Features

  • A3967 Microstepping Driver
  • MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
  • Compatible with 4, 6, and 8 wire stepper motors of any voltage
  • Adjustable current control from 150mA/phase to 700mA/phase
  • Power supply range from 6V to 30V. The higher the voltage, the higher the torque at high speeds

EasyDriver v4.5 - Stepper Motor Driver [ROB12779]

  • Brand: Sparkfun
  • Product Code: SPARKFUN-ROB12779
  • Reward Points: 10
  • Availability: Out Of Stock
  • £13.14

  • Ex Tax: £10.95
  • Price in reward points: 200

Dual Bipolar Stepper Motor Shield for Arduino (A4988)

Dual Bipolar Stepper Motor Shield for Arduino (A4988)

£23.76

Control 2 stepper motors via just 4 digital I/O’s with this stepper motor shield for Arduino

Qty: 3

Gear Stepper Motor with Driver (28BYJ48) - 5V

Gear Stepper Motor with Driver (28BYJ48) - 5V

£11.94

Mainly used in air conditioner louver, small cooling and heating fans

Qty: 1

Motor / Stepper / Servo Shield Kit for Arduino v2 [1438]

Motor / Stepper / Servo Shield Kit for Arduino v2 [1438]

£25.14

Drive DC and Stepper motors with this Arduino shield incorporating the TB6612 MOSFET driver: with ...

Qty: 2

Automotive Gauge Stepper Motor - x27.168 [2424]

Automotive Gauge Stepper Motor - x27.168 [2424]

£16.24

Fine step precision of about 1/2 a degree per step for single stepping, fast response for quick ...

Out Of Stock

Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D [807]

Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D [807]

£5.60

Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel ...

Out Of Stock

DC + Stepper Motor HAT for Raspberry Pi - Mini Kit [2348]

DC + Stepper Motor HAT for Raspberry Pi - Mini Kit [2348]

£29.94

Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel and 3A peak current capability,

Out Of Stock

Stepper/DC Motor Driver Breakout Board - TB6612 1.2A [2448]

Stepper/DC Motor Driver Breakout Board - TB6612 1.2A [2448]

£7.85

Fire four solenoids, spin two DC motors or step one bi-polar or uni-polar stepper with 1.2A per ...

Qty: 3

DC Motor + Stepper FeatherWing Add-on for All Feather Boards [2927]

DC Motor + Stepper FeatherWing Add-on for All Feather Boards [2927]

£26.33

Use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors) with your ...

Qty: 9

TMC260 Stepper Motor Driver Shield

TMC260 Stepper Motor Driver Shield

£38.21

Arduino Shield to drive stepper motors up to 2A per motor coil, 40V max.

Qty: 1

Big Easy Driver [ROB12859]

Big Easy Driver [ROB12859]

£22.37

A stepper motor driver board for bi-polar stepper motors up to a max 2A/phase

Qty: 1

Stepper/DC Motor Driver Breakout Board - DRV8833 [3297]

Stepper/DC Motor Driver Breakout Board - DRV8833 [3297]

£8.34

Spin two DC motors or step one bi-polar or uni-polar stepper with up to 1.2A per channel using the ...

Qty: 3

SparkFun Serial Controlled Motor Driver [ROB-13911]

SparkFun Serial Controlled Motor Driver [ROB-13911]

£20.34

DC motor driver that's been designed to drive small DC motors with ease

Qty: 3

EasyDriver v4.5 - Stepper Motor Driver

EasyDriver v4.5 - Stepper Motor Driver

£13.14

Each Easy Driver can drive up to about 750mA per phase of a bi-polar stepper motor

Qty: 2