This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost. It can achieve a good balance between wireless transition performance and cost.
You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system. What's more,..
This is an omni-directional antenna with an IPEX connector. Its working frequency is 2.4GHz which meets most requirements of Wi-Fi devices. Its 6dBi high gain makes for better signal reception and transmission. Specification Frequency: 2.4 GHz Gain: 6dBi Cable length: 15cm Interface Type: IPEX ..
This product is a based on NXP's latest high-performance radio frequency chip design from the zigbee module with high stability, low power consumption, high cost-effective, rich internal resources, 32bit processor with high-performance embedded chip and large-capacity flash, powerful function, user-..
This 4" / 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as the Adafruit CC3000s!
Antenna comes with a uFL (a.k.a u.FL / IPX / IPEX) connector, so no more need ..
This wireless Transceiver module is an easy to use module if you want to setup your wireless communication system at a low cost with a good balance between wireless transition performance and cost.
You can easily add it with your own MCU / ARM / PIC / AVR / STM32 system.
What's more, this nRF24L01..
The IoT HAT has an on-board antenna. However if you want to increase
the RF range, you can simply attach a compatible antenna to the external
antenna socket and flip a switch. No hacking or soldering is required.Both
Wi-Fi and Bluetooth operate on the same 2.4GHz frequency, they sh..
BLE (dual) Bee v1.0 uses CSR dual mode Bluetooth chip, with the ARM architecture single chip which supports AT instructions. Users can develop flexibly according to the serial baud rate, equipment name, pairing password.
BT Version: Bluetooth Specification V4.0 & BLE
UART send and ..
The modules use nRF51822 from NORDIC as the controller chips. With its small form factor, low power, high economic Bluetooth radio, nRF51-02 can easily be added in your system and help to promote the design process.
nRF51822 is an ultra-low power 2.4 GHz wireless System on Chip (SoC) integrating th..
Bluetooth Low Energy (BLE) module of nRF51-04 is the next generation BLE module released by SEMITRION electronics. The modules use nRF51822 from NORDIC as the controlller chips. With its small from factor, low power, economic Bluetooth radio, nRF51-04 can easily be added in your system and help to p..
Core51822 is a wireless module based on nRF51822 - the Multiprotocol Bluetooth® 4.0 low energy/2.4 GHz RF SoC designed for ULP (ultra low power) wirelesss applications.Core51822 SpecificationsOnboard chip: nRF51822Communication distance (open [email protected] data rate): 30mFrequency range:..
Core51822 (B) is a wireless module based on nRF51822 - the Multiprotocol Bluetooth® 4.0 low energy/2.4 GHz RF SoC designed for ULP (ultra low power) wirelesss applications. Core51822 (B) Specifications Onboard chip: nRF51822 Communication distance (open [email protected] data rate): 30m Frequ..
Crazyradio PA is a long range open USB radio dongle based on the nRF24LU1+ from Nordic Semiconductor. It features a 20dBm power amplifier, LNA and comes pre-programmed with Crazyflie compatible firmware.
The power amplifier boosts the range, giving a range of more than 1km (line of sight) together w..