Grove - IMU 10DOF is based on MPU-9250 and BMP180. It combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and barometer in standard Grove module. Total 10 degrees of freedom make it suitable for mobilephone, aircraft, smart watch etc.
10 Degrees of Freedom
Xadow - IMU 10DOF is based on MPU-9250 and BMP180, combining a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and barometer with standard Grove connector. Total 10 degrees of freedom make it suitable for mobile phones, aircraft, smart watches etc.
10 Degrees of Freedom
At the beginning,the inertial measurement unit is an electronic device that measures and reports on a craft's velocity, orientation, and gravitational forces, using a combination of accelerometers,gyroscopes, and magnetometers. Now IMUs are commonly used in the Human-computer interaction(HCI), navig..
The Pololu AltIMU-10 v5 is an inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5, and adds an LPS25H digital barometer. An IC interface accesses ten independent pressure, rotation, acceleration, and magnet..
The SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BME280 Breakout has..
This module can measure the air pressure and temperature of the current environment. You can also convert the signal to show height. For example, you could use this Xadow on a wearable device to measure height when you climb a mountain.
Wide barometric pressure range
Ultra-low power co..
The Xadow - Barometer BMP180 is a barometer module of Xadow series. It is the upgrate of Xadow - Barometer. The module can measure the air pressure and temperature of the current environment, and then you can convert this signal to information of altitude. If you are planning to use Xadow to do a we..
Barometer Sensor module for Gadgeteer. This module is used for atmospheric pressure, altitude and temperature sensing. A sensor HP03M, which measures the pressure based on a piezoresistive pressure sensor, was equipped on this module, and provides accurate pressure and temperature data to Gadg..
This BMP180 module is a neo high precision digital sensor which is compatible with BMP085 module. With the ultra low power and voltage design, the BMP180 is ideal for mobile phones, PDAs, GPS and other mobile devices. Whatsmore, its low altitude noise,high speed reaction and I2C communication are al..
This is a simple breakout board for the BMP085 high-precision, low-power barometer pressure sensor from DFRobot. The BMP085 offers a measuring range of 300 to 1100 hPa with an absolute accuracy of down to 0.03 hPa. It's based on piezo-resistive technology for EMC robustness, high accuracy and linear..
This is a Grove module for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It’s based on piezo-resistive technology for high accuracy, ruggedness and long term..
This Grove-Barometer Sensor features a Bosch BMP085 high-accuracy chip to detect barometric pressure and temperature. It can widely measure pressure ranging from 300hPa to 1100hPa, AKA +9000m to -500m above sea level, with a super high accuracy of 0.03hPa (0.25m) in ultra-high resolution mode.