These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and a spare in the ARM-dev box is useful.
One cable per order. The ribbon cable is 0.06mm/0.025" pitch and..
This convenient 1.3mm DC to 2.1mm DC adapter cable lets you plug one of our solar panels into our optimized Solar Lithium Ion/Polymer charger!2.1mm inner diameter (5.5mm outer diameter) is the most common type of DC plug, but you can use this adapter for anything else that has a 1.3mm ID (..
40pin to 26pin cable for the Raspberry Pi B+
200cm in length
short circuit impedance：>20KΩ
This A/V RCA Cable for Raspberry Pi is a great way to turn your Pi 2, A+ or B+'s output into a full on composite video and audio device. Simply connect the cable to your Raspberry Pi's 3.5mm jack and the other side into whatever device you're looking to connect to and get full RCA visuals and ..
The analog sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our analog sensor to the IO board.
Maximum voltage: <50V
Maximum current: <1000mA
One Servo Type connector with Signal, GND, PWR.
One 3 ..
Basic Fastener Kit contains many standard components including screws, nuts, rivers, cable ties, etc. The parts can be used in fastening different pieces in mechanical designs (such as building robots), isolating or fastening PCB, connecting shells, etc. This box can help makers get rid of the annoy..
This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The leads of ..
This probe kit is designed for Bus Pirate v4 that make it easier to connect Bus Pirate v4 to any circuit boards. It has 12 clip probes and a 12 pin connector, good partner for Bus Pirate V4!
12 clip probes
20cm in length..
Connect this to that without soldering using these handy alligator clip test leads. 20" cables with alligator clip on each end, colour coded. You get 10 pieces in 5 colours. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold th..