Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly charger!
We don't have the 'mating' version of this, with the receptacle - but we do have a long extension cable that can be cut in half.
New! We now use genuine JST PH connectors ..
By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them.
This PH2 Female/Male JST 2-pin Extension Cable comes with an in-line Switch - click once to turn on, click again to turn off. It's super handy especially in tandem with our JST..
This product includes 4-pin 2.0mm mating connector housing (10 units) and crimp pins (40 units).
They work with wires ranging from 28 to 26 AWG.
4-pin 2.0mm mating connector housing
28 to 26 AWG crimp pins
Connector housing 4-pin 2.0mm (10 units)
Crimp pins (40 u..
This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each)，through-hole type shrouded header （20 units each）and crimp contact (100 units).
Current rating: 2A AC,DC (AWG #24)
Voltage rating: 100V AC,DC
Temperature range： -25℃ to +85℃ （including temperature rise ..
This JST Expansion module is .NET Gadgeteer compatible, which uses the .NET Micro Framework to make writing code for your device as easy as writing a desktop, Web or Windows Phone application.
The connectors of Classic 3PIN sensors from DFROBOT are not compatible with those of the Gadgeteer..
This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.
Dimensions: 6" length..
This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.
Wire length is 140mm (about 5.5 ..
A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. We also have simple JST pigtails that mate with this connector.
13mm x 10mm x 2mm / 0.5" x 0.4" x 0.08"
Height with JST: 7.3mm
This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendly breakout. There's two ground pins, one 'switched' power pin, and one pin that is alw..
This is an useful extension cord for Adafruit JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable projects where you may want the battery pack far..
This is a simple two wire cable. One end has a 2 pin female 0.1" pitch connector. Opposite end has 2-pin JST connector.
Digikey 455-1734-1-ND (Top Entry)
Digikey 455-1749-1-ND (Side Entry)..