Want to use your new Official Raspberry Pi 7" Touchscreen Display but need to keep your GPIO pins free? This handy little cable is just what you need!
We love the Raspberry Pi touchscreen but we hate to block up our GPIO! That's why we had these lovely little cables custom made, we figured you might..
This is the red Dock cable, which is a high quality USB A to micro B cable, for connecting your Flotilla Dock to your computer.There are also cables for connecting your Flotilla modules to the Dock, and the Dock to your computer. These blue Flotilla ropes (micro B to micro B) come in three different..
The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters to som..
Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to extend the USB port for your Raspberry Pi, Arduino, Feather or really anything development board.This Micro-B male/female extension ca..
This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when putting an Arduino Leonardo or Raspberry Pi in a box.
The jack half has two mounting 'ears' with M3 screws installed, 1" / 27mm apart. Can be used with b..
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B.
Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.
Simple but effective - this breakout board has a USB Micro-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project.
We use a micro-AB connector with through-hole shielding pads for an excellent strong connection - it wo..
This simple board breaks out all five pins of a USB Micro-B connector to a 0.1" pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.This board breaks out the VBUS, GND, D-, D+, and ID pins of a USB Micro-B connector. The VBUS and GND pins can be used..
As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and lighter than a large optical microscope but packs quite a bit of power in its little body. There's a 5.0 megapixel sensor inside and an optical magnifier that..
As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and lighter than a large optical microscope but packs quite a bit of power in its little body. There's a high quality 640x480 camera sensor inside and an optical ..