Taking a break

 We're taking a break and will be back soon. We will ship orders on 2017-07-03. 

This breakout board uses the LTC3588 Piezoelectric Energy Harvester from Linear Technologies. This board can be used not only for harvesting piezoelectric energy, but solar energy as well. There is a bridge rectified input for piezo elements (PZ1 and PZ2) and a direct input (VIN) for DC sources. Both are clamped to 20V. In addition, the board can simply be used as a standalone nanopower buck regulator.

An ultralow quiescent current undervoltage lockout (UVLO) mode with a wide hysteresis window allows charge to accumulate on an input capacitor until the buck converter can efficiently transfer a portion of the stored charge to the output. In regulation, the LTC3588 enters a sleep state in which both input and output quiescent currents are minimal. The buck converter turns on and off as needed to maintain regulation.

Four output voltages (1.8V, 2.5V, 3.3V and 3.6V) are pin selectable with up to 100mA of continuous output current and comes pre-configured for an output of 3.3V. However, the output capacitor may be sized to service a higher output current burst. An input protective shunt set at 20V enables greater energy storage for a given amount of input capacitance.


  • 950nA Input Quiescent Current (Output in Regulation – No Load)
  • 450nA Input Quiescent Current in UVLO\
  • 2.7V to 20V Input Operating Range
  • Integrated Low-Loss Full-Wave Bridge Rectifier Up to 100mA of Output Current
  • Selectable Output Voltages of 1.8V, 2.5V, 3.3V, 3.6V
  • High Efficiency Integrated Hysteretic Buck DC/DC
  • Input Protective Shunt – Up to 25mA Pull-Down at VIN ≥ 20V
  • Wide Input Undervoltage Lockout (UVLO) Range

Energy Harvester Breakout - LTC3588 [BOB09946]

  • Brand: Sparkfun
  • Product Code: SPARKFUN-BOB09946
  • Reward Points: 26
  • Availability: 2
  • £30.72

  • Ex Tax: £25.60
  • Price in reward points: 300

LiPo Rider Pro

LiPo Rider Pro

£9.54 £12.47

LiPo Rider Pro powers your favorite electronic kit with green energy

Qty: 4

Seeeduino Stalker - Waterproof Solar Kit

Seeeduino Stalker - Waterproof Solar Kit


Seeeduino Stalker Waterproof Solar Kit for all your tracking, monitoring and control projects.


Bicycle Dynamo With Bracket - 6V 3W

Bicycle Dynamo With Bracket - 6V 3W


Use this dynamo to light up LEDs, or something else... Save energy, save the planet.

Qty: 7

Energy Shield (LiPo)

Energy Shield (LiPo)


Energy Shield is a LiPo battery based power shield that keeps your project alive.

Qty: 11

Solar Lipo Charger (3.7V)

Solar Lipo Charger (3.7V)


This Solar lipo charger is designed to intelligently charge a single lithium battery (3.7V), with ...

Qty: 1

Solar Charger Shield V2.2

Solar Charger Shield V2.2


The solar charger is a stackable shield to Arduino compatible platforms, enables adaptive battery ...

Out Of Stock