The sensor is designed for indoor air quality testing. The main gases detected are carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases.
Low power consumption
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply.
Low power consumption
Responsive to a..
Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable alcohol detector
Power requirements: 5 VDC @ ~120 mA (heater on)
Detection Gas: Alcohol
Concentration: 20-1000ppm Alcohol
Interface: 1 TTL c..
The analog gas sensor - MQ3 is suitable for detecting alcohol, this sensor can be used in a Breathalyser.It has a high sensitivity to alcohol and small sensitivity to Benzine. The sensitivity can be adjusted by the potentiometer.
Standard assembling structure (Times-of-5mm Center di..
MQ303A is a semiconductor sensor for Alcohol detection. It has very good sensitivity and fast response to alcohol, suitable for portable alcohol detector.
Fast response and resume
long life and low cost
Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard current generator. Made with aluminium alloy, the anemometer is of high strength, weather resistance and ..
This module can measure the air pressure and temperature of the current environment. You can also convert the signal to show height. For example, you could use this Xadow on a wearable device to measure height when you climb a mountain.
Wide barometric pressure range
Ultra-low power co..
Barometer Sensor module for Gadgeteer. This module is used for atmospheric pressure, altitude and temperature sensing. A sensor HP03M, which measures the pressure based on a piezoresistive pressure sensor, was equipped on this module, and provides accurate pressure and temperature data to Gadg..
This is a simple breakout board for the BMP085 high-precision, low-power barometer pressure sensor from DFRobot. The BMP085 offers a measuring range of 300 to 1100 hPa with an absolute accuracy of down to 0.03 hPa. It's based on piezo-resistive technology for EMC robustness, high accuracy and linear..
This is a Grove module for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It’s based on piezo-resistive technology for high accuracy, ruggedness and long term..
This Grove-Barometer Sensor features a Bosch BMP085 high-accuracy chip to detect barometric pressure and temperature. It can widely measure pressure ranging from 300hPa to 1100hPa, AKA +9000m to -500m above sea level, with a super high accuracy of 0.03hPa (0.25m) in ultra-high resolution mode.
Give your next sensor project a nose for gasses with the Adafruit MiCS-5524 Gas Sensor Breakout. This breakout makes it easy to use this nice sensor from SGX Sensortech. The MiCS-5524 is a robust MEMS sensor for indoor carbon monoxide and natural gas leakage detection, it's suitable also for indoor ..