This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). The VL6180X uses time-of-flight measurements of infrared pulses for ranging, allowing it to give accurate results independent of the target’s color and surface. Distance and ambient light level measurements can be read through a digital IC interface. The board has a 2.8 V linear regulator and integrated level-shifters that allow it to work over an input voltage range of 2.7 V to 5.5 V, and the 0.1 pin spacing makes it easy to use with standard solderless breadboards and 0.1 perfboards.

Overview

The VL6180X from ST Microelectronics is a sensor that combines proximity ranging and ambient light level measurement capabilities into a single package. This board is a carrier for the VL6180X, so we recommend careful reading of the VL6180X datasheet (2MB pdf) before using this product.

Unlike simpler optical sensors that use the intensity of reflected light to detect objects, the VL6180 uses ST’s FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, making it essentially a short-range lidar sensor. This time-of-flight (TOF) measurement enables it to accurately determine the absolute distance to a target with 1 mm resolution, without the object’s reflectance influencing the measurement. The sensor is rated to perform ranging measurements of up to 10 cm (4), but it can often provide readings up to 20 cm (8) with its default settings. Furthermore, the VL6180X can be configured to measure ranges of up to 60 cm (24) at the cost of reduced resolution, although successful ranging at these longer distances will depend heavily on the target and environment. (For more information, see “Range scaling factor” below.)

The VL6180 also includes an ambient light sensor, or ALS, that can measure the intensity of light with which it is illuminated. Ranging and ambient light measurements are available through the sensor’s IC (TWI) interface, which is also used to configure sensor settings, and two independently-programmable GPIO pins can be configured as interrupt outputs.

The VL6180X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. It also operates at voltages below 3 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V. Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible.

The carrier board includes a low-dropout linear voltage regulator that provides the 2.8 V required by the VL6180X, which allows the sensor to be powered from a 2.7 V to 5.5 V supply. The regulator output is available on the VDD pin and can supply almost 150 mA to external devices. The breakout board also includes a circuit that shifts the IC clock and data lines to the same logic voltage level as the supplied VIN, making it simple to interface the board with 3.3 V or 5 V systems, and the board’s 0.1 pin spacing makes it easy to use with standard solderless breadboards and 0.1 perfboards. The board ships fully populated with its SMD components, including the VL6180X, as shown in the product picture.

For a similar, longer-range sensor (up to 2 m) without ambient light sensing functionality, see our VL53L0X carrier.

Specifications

  • Dimensions: 0.5 0.7 0.085 (13 mm 18 mm 2 mm)
  • Weight without header pins: 0.5 g (0.02 oz)
  • Operating voltage: 2.7 V to 5.5 V
  • Supply current: 5 mA (typical; varies with configuration, target, and environment)
  • Output format (IC): 8-bit distance reading (in millimeters), 16-bit ambient light reading
  • Distance measuring range: up to 10 cm (4) specified; up to 60 cm (24) possible with reduced resolution. See the graph at the right for typical ranging performance.
    • Ranging beyond 10 cm is possible with certain target reflectances and ambient conditions but not guaranteed by specifications. By default, the sensor can report distances up to 20 cm, or it can be configured to measure up to 60 cm with reduced resolution.
    • The datasheet does not specify a minimum range, but in our experience, the effective limit is about 1 cm.

Included components

A 17 strip of 0.1 header pins and a 17 strip of 0.1 right-angle header pins are included, as shown in the picture below. You can solder the header strip of your choice to the board for use with custom cables or solderless breadboards, or you can solder wires directly to the board itself for more compact installations.

The board has two mounting holes spaced 0.5 apart that work with #2 and M2 screws (not included).

VL6180X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 60cm max [2489]

  • Brand: Pololu
  • Product Code: POL-2489
  • Reward Points: 12
  • Availability: 5
  • £14.94

  • Ex Tax: £12.45
  • Price in reward points: 200

VL53L0X Time of Flight Distance Sensor - 30mm to 1000mm [3317]

VL53L0X Time of Flight Distance Sensor - 30mm to 1000mm [3317]

£20.34

The VL53L0X can detect the "time of flight", or how long the light has taken to bounce back to the ...

Qty: 5

VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max [2490]

VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max [2490]

£15.22

This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the r ...

Out Of Stock

VL6180X Time of Flight Distance Ranging Sensor (VL6180) [3316]

VL6180X Time of Flight Distance Ranging Sensor (VL6180) [3316]

£18.18

The VL6180X can detect the "time of flight", or how long the laser light has taken to bounce back to ...

Qty: 4