Your Cart


Brand: DFRobot Model: DFR-DFR0024
The DS18B20 is a digital temperature sensor from DALLAS USA. It can be used to quantify the environmental temperature testing. The sensor reads temperature range -55  ~ +125 ℃, with inherent temperature resolution of 0.5 ℃ and 9-12 bit serial output Multi-point networking mesh temperature mea..
Ex Tax:£4.22
Brand: Adafruit Model: ADA-3387
Add motion, direction and orientation sensing to your Arduino project with this all-in-one 9-DOF sensor. Inside the chip are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating..
Ex Tax:£16.95
Brand: Adafruit Model: ADA-1778
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. We have a couple digital thermocouple amplifiers in the shop already from Maxim. Now we're happy to introduce an excellent analog-output amplifier. This is a very simple sensor to use, and if your microc..
Ex Tax:£12.59
Brand: Sparkfun Model: SPARKFUN-SEN13676
The SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BME280 Breakout has..
Ex Tax:£20.85
Brand: Seeedstudio Model: SEEED-310010023
This module can measure the air pressure and temperature of the current environment. You can also convert the signal to show height. For example, you could use this Xadow on a wearable device to measure height when you climb a mountain. Features Wide barometric pressure range Ultra-low power co..
Ex Tax:£7.73
Barometer BMP180 (Xadow) v1 Barometer BMP180 (Xadow) v1
Out Of Stock
Brand: Seeedstudio Model: SEEED-101040003
The Xadow - Barometer BMP180 is a barometer module of Xadow series. It is the upgrate of Xadow - Barometer. The module can measure the air pressure and temperature of the current environment, and then you can convert this signal to information of altitude. If you are planning to use Xadow to do a we..
Ex Tax:£10.95
Brand: Seeedstudio Model: GHI-GAD11643P
Barometer Sensor module for Gadgeteer. This module is used for atmospheric pressure, altitude and temperature sensing.  A sensor HP03M, which measures the pressure based on a piezoresistive pressure sensor, was equipped on this module, and provides accurate pressure and temperature data to Gadg..
Ex Tax:£25.03
Brand: DFRobot Model: DFR-TOY0058
This BMP180 module is a neo high precision digital sensor which is compatible with BMP085 module. With the ultra low power and voltage design, the BMP180 is ideal for mobile phones, PDAs, GPS and other mobile devices. Whatsmore, its low altitude noise,high speed reaction and I2C communication are al..
Ex Tax:£7.10
Brand: Adafruit Model: ADA-2651
Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085 / BMP180 / BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! This preci..
Ex Tax:£12.30
Brand: Adafruit Model: ADA-1893
This pressure sensor from Freescale is a great low-cost sensing solution for precision measurement of barometric pressure and altitude. The MPL3115A2 has a typical 1.5 Pascal resolution, which can resolve altitude at 0.3 meters (compare to the BMP180 which can do 0.17m). It has some upsides compared..
Ex Tax:£8.95
Brand: Adafruit Model: ADA-992
This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMP085, which has up to 0.03 hPa resolution so we don't suggest it as a precision altimeter. However, it's great..
Ex Tax:£8.95
Contact-less Infrared Thermopile Sensor Breakout - TMP007 [2023] Contact-less Infrared Thermopile Sensor Breakout - TMP007 [2023]
Out Of Stock
Brand: Adafruit Model: ADA-2023
Unlike most of the other temperature sensors we have, this breakout has a really cool IR sensor from TI that can measure the temperature of an object without touching it! The TMP007 is the latest thermopile sensor from TI, and is an update of the TMP006. The internal math engine does all the temper..
Ex Tax:£12.95
Showing 1 to 12 of 88 (8 Pages)