The TinkerKit! DMX Master Shield is used to drive a series of DMX receivers.
Like a regular shield it has to be plugged on top of the Arduino and it can be stacked on top of other shields. It is used both as OUTPUT and INPUT. For each line it has two kinds of port that can be used: the DMX connecto..
The DMX MosFet Receiver is a DMX module that mounts four mosfets. They can be individually controlled using a DMX master like TinkerKit’s DMX Master Shield. Each mosfet supports up to 24V DC and the board runs at a range from 12V to 24V. A single master can control up to 512 receivers individually (..
The DMX Relay Receiver is a DMX module that mounts four relays. They can be individually controlled using a DMX master like TinkerKit’s DMX Master Shield. It requires 12V and each relay supports up to 220V at 10A. A single master can control up to 512 receivers individually (128 of these boards for ..
This module switches a high current load using a high power transistor. Unlike a mechanical relay, this is capable of high speed switching for use with PWM.
Output: This module lets you control devices operating at a maximun of 24VDC with an Arduino pin. To wire the module, connect the power supply..