Xadow - IMU 10DOF is based on MPU-9250 and BMP180, combining a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and barometer with standard Grove connector. Total 10 degrees of freedom make it suitable for mobile phones, aircraft, smart watches etc.
10 Degrees of Freedom
The H3LIS331DL is a low power high performance 3-axis linear accelerometer belonging to the “nano” family, with digital I2C serial interface standard output. The device features ultra low power operational modes that allow advanced power saving and smart sleep to wake-up functions. The H3LIS331DL ha..
This part is discontinued. Please see Xadow Basic Sensors.Xadow - IMU 6DOF is a motion tracking module. Its design is based on the sensor MPU6050 which is the world’s first integrated 6-axis MotionTracking device, that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor..
Xadow - IMU 9DOF is a high performance 9-axis motion tracking module, which is based on the MPU-9150, the world's first integrated 9-axis motion tracking device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets an..
This module can measure the air pressure and temperature of the current environment. You can also convert the signal to show height. For example, you could use this Xadow on a wearable device to measure height when you climb a mountain.
Wide barometric pressure range
Ultra-low power co..
The Xadow - Barometer BMP180 is a barometer module of Xadow series. It is the upgrate of Xadow - Barometer. The module can measure the air pressure and temperature of the current environment, and then you can convert this signal to information of altitude. If you are planning to use Xadow to do a we..
The Xadow - BLE is a Bluetooth Smart enabled Xadow form factor module based on CC2540 microprocessor. The Xadow - BLE can be used in hardware setups, where normally an Xadow module is used. Using a Xadow - BLE an Xadow enabled embedded system can communicate with desktop computers, smartphones, tabl..
This is a Bluetooth 4.0 module (Bluetooth 4.0 slave module). Compared with Bluetooth version 2.0 and 3.0, it’s more advanced for its lower power consumption. You can easily connect your own project to the primary device of Bluetooth 4.0 by using this module. For instance, it can transfer the detecte..
This is a Xadow module which can emit a tone. To drive it, you need to control two pins simultaneously: this is different from Grove - Buzzer which uses one pin for control. It is petite but LOUD! It can be used for making beeps, tones and alerts.
Compatible with Xadow Modules
Xadow Compass is a 3-Axis Digital Compass which is a member of Xadow family. The module is based on a low field magnetic sensor HMC5883. It features 1° to 2° compass heading accuracy, and it is using I2C serial bus to communicate with your microcontroller. Xadow Compass is a useful tool for helping ..
Xadow – Multichannel Gas sensor is a very small sensor board with a compact MOS sensor, MiCS-6814. The MiCS-6814 is a robust MEMS sensor for the detection of pollution from automobile exhausts and for agricultural/industrial odours. This sensor board has two standard Xadow interfaces. It is very eas..
Xadow GPS is an OEM GNSS receiver module, including the Fastrax IT530M and a tiny 12mm squared ceramic patch antenna. The low power module outputs a series of standard NMEA format data which provides position, satellite information and time, etc. This module can be easily connected directly to Xadow..